EST. 1971

Standard Booth Model TSDD4424 and TSDD/DT4424
Provides a complete painting facility for trucks based on the same engineering principles as our side downflo auto booth.

The Custom Aire TRUCK SIDE DOWNFLO spray booth provides a complete painting facility for trucks based on the same engineering principles as our SIDE DOWNFLO AUTO BOOTH. Filtered air is introduced evenly over the ceiling of the booth and is drawn smoothly down the sides of the truck and through the sides of the booth near the floor. The over-spray is trapped in the exhaust arrestors located in the floor and the remaining air and vapors are exhausted into the atmosphere.

The booth utilizes the existing floor of the building without any modification. Constructed of 18GA galvanized steel, the booth is easily assembled by following RSI supplied instructions and blueprints.
The Custom Aire TRUCK SIDE DOWNFLO spray booth comes in two standard models (TSDD or Truck Side DownFlo and TSDD/DT or Truck Side DownFlo Drive-thru) and is also available in custom sizes to fit specialized needs. Consult RSI for further information and pricing.

STANDARD MODEL: TSDD4424 DRIVE-THRU MODEL: TSDD/DT4424
DIMENSIONS FOR ALL MODELS:

Inside: 16’0″wide x 16’0″high x 44’0″long

Outside: 18’4″wide x 18’2″high x 44’4″long

Door: 11’0″wide x 14’0″high

FEATURES INCLUDE:

4 – 24″ diameter tube-axial fan with variable pitch, non-sparking blades

4 – 2HP open type motor for operation on 208/230/460 VAC, 60Hz, 1 or 3 phase

One complete set of Laminar III air supply filters and one set of exhaust arrestors

Fluorescent light fixtures with clear tempered glass with tubes

3’0″ x 7’0″ personnel access door with observation window

24 feet of exhaust stack, 2 roof jacks, and 2 upflow caps

Door limit switches and air valve

Painter’s work station

Manometer to monitor porosity of arrestors

Installation hardware, caulking, and door gaskets

Blueprints and assembly instructions

Rhodes Systems International